who to go to...

[Lafora]

for carbs tuning?

building an engine right now and i've already got dual DCOE's going with em.

been reading Pat Braden's book on the webers as well as nother book on the topic...but kinda intimidated to get down and dirty when i got quite a bit invested in the engine.

so

should i get the hands greasy?

or should i take it to a shop to do it

if it's the latter, who'd you recommend?

thanks

[ttarleton]

I do Webers all the time. They are not easy to setup without a dyno and a wideband O2 sensor. I can get you close if you describe your motor and carbs, and if you are using an IR manifold or not. I usualy charge 150 us to do a dyno session plus whatever parts ( jets ect ) are needed, but I might do it in the name of international relations for less. (Depends on how interesting the car is) anyway I will help you get in the ballpark for free, just email me.

[ice/solo racer]

Just wondering lafora,are these carbs going on toyota 4ag?I think if I remember correctly you have a ae86 corolla right?
I have the copper corolla that runs is BSS,I'm looking for some parts for mine or at least a few more contacts on these cars,if you can help out that would be great.