PDA

View Full Version : Crashed my E36 BMW all is for sale:


Bruno
09-07-2007, 04:04 PM
- 2.8 alum block knifedge crank with titanium retainers and M3 cams and forged pistons: head cracked: 2000 Cdn Cost 6000 cdn to build good for 260+HP
- M3 injectors 21lb: 80 Cdn
- OBDI M50 intake manifold 100 Cdn
- UUC underdrive pulleys (probably damaged)
- OBDI conversion harness and DME: 300 Cdn
- SS clutch line: 30.00 US
- 8.5lb Lightweight BMW Motorsport flywheel and race clutch: 900 Cdn
- Ireland engineering headers: 400 Cdn
- M3 short shifter and delrin bushings: 100 Cdn
- M3 transmission and driveshaft: 800 Cdn
- M3 transmission 40 000km: 800 Cdn
- custom CAI (probably damaged)
- Borla Stainless steel 3" racing exhaust with Magnaflow resonator: 350 Cdn
- 5 Point harness passenger
- 6 spoint harness driver bought last year: 100 Cdn
- 2 x racing seats for E36: 200.00 Cdn
- Front solid offset delrin control arm bushings: 50 Cdn
- M3 front spindle and brakes: 300.00 Cdn
- Custom front strut brace (damaged)
- BMW X brace: 100 Cdn
- Mintex full race compound brake pads used + new HT10 race pads: 200.00 Cdn
- Ground control racing coil over suspension: 1000 Cdn
- UUC sway bars front and rear: 150.00 Cdn (front might be bent)
- Rear adjustable control arms for negative camber: 70 Cdn (1 is damaged can be fixed)
- 3 x 17" rims with R compound tires BBS RK: 500.00 Cdn
- Steering wheel with momo hub and quick disconnect. 70 Cdn
- ARP DTM wing with trunk lid: 100 Cdn
- Complete M3 rear axle with solid subframe bushings and speherical Trailing arm bushings 500 Cdn
- M3 3.38 LSD differential: 40 000km 800 Cdn
- SS brake lines sold with callipers
- Fire system 300 Cdn
- battery shut off switch + tiny battery... 100 Cdn
- Euro oil canister for oil cooler: 200 Cdn
- Euro HFM: 100 Cdn
- 325is LSD 3.15 differential 270.000km: 250 Cdn

Parts to be installed:
- Oil pressure, oil temperature, water temperature gauges mechanical: 120 Cdn

- 1 spare E36 coupe hood: 50 Cdn
- 1 set of 17" rims with 50% used toyo RA1: 800 Cdn
- 1 set of 17" new rims with 10% used toyo RA1: 1000 Cdn
- 2.8l iron block + spare set of 2.8l pistons with connecting rods
- lot's of engine parts for the cylinder head, spare cams, vanos, coils...
- Black dashboard E36 coupe: 50.00 Cdn

I have yet to take pictures of it all, I will start pulling the parts out this week end.