loose rearend what to do?

[ADAM]

my 89' 240sx rear drive has become very loose in the rear since i have lightened it and put in a roll bar and rear strut brace. the only thing that helps so far is running much lower pressure in the rear tires, front camber is at -1.5 deg rear is at -1 deg (and at its max neg setting in the rear)

1=would reinstalling the stock rear sway bars help?
2= more or less camber?
3=bigger tires?

anyone know? or am i just pushing it to hard in the corners?

[Shaman]

I'd try lowering the rate of the rear bar. Maybe try the stock one again, since that's simple.

[Brent]

If your rear end is loose you could try thigh master Adam.
If your cars rear end is loose, you could try adjustable shocks and firm up the front and/or soften the rears.
I just put a set of adjustable koni's on my Neon and by firming the rears and softening the fronts I can make my cars rear slide out nicely on corners. I assume the reverse could work for your rear drive.

[Theo]

Being Greek, you'd figure I'd be an expert in this area.

Anyway..

I've dabbled in it by putting a big bar in my rear end, and it loosened things up nicely. In my case I put in a Type-r sway bar.

22mm up from 13mm is a big change, butt if you ease into it you won't get hurt. Just take it easy and don't over drive the thing.

You you have a big bar in your rear end too, eh? Try putting a smaller (stock) one there.

It's cheap and you won't take any points for it.

[Brent]

Oh yeah, forgot to add that increasing the size of your front sway bar will offset the oversteer created by your larger rear sway bar.
I suffer from CRAFT disease ( can't remember a f---ing thing).