Dyno/fender rolling?

[smokinfire]

Are there any sponsers or shops that anyone has had experience with that have a dyno, or have a fender rolling service?

[JoeT]

Are there any sponsers or shops that anyone has had experience with that have a dyno, or have a fender rolling service?

I know of a place in Georgetown that'll do both, but they are not a sponsor here.

There's also multiple Dyno's around the Toronto Area that'll provide Dyno Services, again, none of them are sponsors here. What area are you in?

[smokinfire]

I am in South Etobicoke, so anything within a reasonable drive of GTA is fair game.

[Burnsey]

I know of someone who can loan out a fender rolling tool. Not sure of the cost but I can find out easily enough. PM me if you need more info.

EDIT: it's located in Mississauga.

[JoeT]

I am in South Etobicoke, so anything within a reasonable drive of GTA is fair game.

Within 15 minutes drive:
Yoshio - Dynapac Dyno 2wd only
www.japanese-auto.com
174 Bridgeland Avenue
Toronto, Ontario, Canada
M6A 1Z4
Telephone: 416-781-1179

Neetronics - Dynojet Dyno AWD & 2WD + Home made Clayton Dyno
www.neetronics.com
Neetronics 559 Speers Rd
Oakville, Ontario
L6K 2G4
Canada
(416) 848-0653

[JoeT]

I am in South Etobicoke, so anything within a reasonable drive of GTA is fair game.

Fender Roller in South Etobicoke, Islington and the Queensway used to be a long time Solo2 sponsor, GTA Wheel and Tire Zone. It's on the Queensway just west of Islington on the south side, at the first stoplight west.

[smokinfire]

Thanks for the replys, I will start making some calls.

[jwl]

For Dyno try Dan Pye. He has a portable dynapack dyno and will come to your shop.

info@u2ndyno.com. website www.u2ndyno.com

[Andy]

Sasha at SG Motorsports can look after both of your needs. He is in the Dixie/Derry road area.
647-818-4014

Andy

[blurred]

I would also highly recommend www.Dynamotorsports.ca (Allen Rd/Sheppard area). They can do fender rolling (proper roller tool) and use a Dynapak for proper load tuning. They are also a fully equipped shop and share their space with an engine builder - Canadian Cylinder Head Technologies.