PDA

View Full Version : re: normalizing welds in cages

ADAM
10-16-2003, 12:28 PM
1=should mig welds be normalized on DOM roll cage tubing?
2= if so...how does one normalize a mig weld on DOM tubing?

please advise
thanks
adam
RedRabbit Racer
10-16-2003, 01:35 PM
Why don't you give Ralph at CSC racing a call and ask?
rpr
10-16-2003, 04:12 PM
Nope.
ice/solo racer
10-16-2003, 04:22 PM
I believe only moly tubing needs to have the welds normalized.
DECH_92
10-16-2003, 09:19 PM
Like ice/solo said, moly tubing welds has to be normalized
If you want to talk to a master about moly tubing call

The Chassis Shop
265 5th Concession
Ajax, Ont.
LIS IS7
905 619-1380
Ask for Eddy.

Great racer himself.
Older German guy welding moly for 30 plus years, great welds.
rpr
10-17-2003, 02:01 PM
It doesn't have to be normalized if the tubing is already normalized before welding. You can get both. Usually denoted by an 'N' at the end of the number, i.e. 4130N is normalized. I just used 4130, I don't remember if that is a real chro-moly number.