View Full Version : Recommendations for rear end rebuild
Wolverine
01-24-2011, 11:00 AM
I have a friend who just grenaded the diff in her 2002 Camaro. Any recommendations for a shop in the Bowmanville/Whitby/Oshawa/Ajax area that is a CASC sponsor/reputable and capable of rebuilding the diff?
Thanks
Dave
Doug P
01-24-2011, 11:19 AM
Ask the guys here.
www.lsffa.com
ScottZ
01-25-2011, 11:34 AM
Hi Tek 1545 Bayly St. Pickering Rob Vitro @ 905-831-1985 installed a Auburn LSD for my Camaro a few years back and were reasonable at that time.
Cheers,
Dave Barker
01-26-2011, 09:01 AM
I had an Eaton diff put in my 2002 by Otis Gear in Oshawa. Good job and not expensive
In the past have also used Prostreet Performance on Wentworth in Whitby.
She blew a Torsen? Did she just blow the ring/pinion gears?
Wolverine
01-26-2011, 09:59 AM
Thanks a lot guys. Will pass this on.
From what was described, the ring and pinion.
Wolverine
01-27-2011, 03:19 PM
So it turns out it was the LSD that gave out, shrapnel took out the Ring and Pinion, so full rebuild. Thanks for all the help! She's decided to replace it with an Auburn unit, so all should be good.
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.