Brake Pads: Hawk vs Carbotech

[Jasonoff]

More specifically Hawk DTC70 vs Carbotech XP12 and DTC60 vs XP10.

Anyone have experience with either or both? From the data on the pads they appear to be roughly equivalent.

[Dave Barker]

I have used Hawk HT-10s and to some extent HT-14s. Have also used Carbotech XP12s and XP 10s on a heavy street equiped Camaro (i.e. 3670 lb including me)

Carbotechs win hands down. Won't go back to Hawks.

[Jasonoff]

I have used Hawk HT-10s and to some extent HT-14s. Have also used Carbotech XP12s and XP 10s on a heavy street equiped Camaro (i.e. 3670 lb including me)

Carbotechs win hands down. Won't go back to Hawks.Hey Dave, thanks for the input, much appreciated.

I believe the DTC60 & 70 are the replacement for HT-10 & 14. Any specifics as to why the Carbotech win hands down? Durability, longevity, feel etc?

I have heard people complain about the bed in procedure for Carbotech but don't know if there's any truth to the matter.

[daleyc]

I have had a few sets of Carbotechs (2 x xp10 and 1x xp8) and LOVE them. I recommend them to everyone looking for a performance set of pads. I do not have any related experience with Hawk pads so I can't tell you any info about them.

Not a huge deal with the bed in procedure, takes 10-15 min (done late at night) and then you're set.

[Jasonoff]

Not a huge deal with the bed in procedure, takes 10-15 min (done late at night) and then you're set.I figured as much which is just like any other pad.

I've heard they're difficult/fussy to bed in more than once so it caught my attention.

[nissannx]

I figured as much which is just like any other pad.

I've heard they're difficult/fussy to bed in more than once so it caught my attention.

I can try to scan the instructions and send them to you; very simple and straightforward.
As you know, I have a Group Buy annually and I've never had anyone complain about bed in process for Carbotech.
Frank

[ONdriver]

It's not rocket science, just follow the instructions! ;)

http://www.ctbrakes.com/faqs.asp#bedding4

[gOt_rally?]

Alot of miata guys have had problems with the carbotechs. For one, you will neeed a fresh rotor as they are no compatible with other pads friction material and will not bed in properly. Secondly if not broken in just right a bunch of people where complaining about uneven pad deposits which led to vibrations under braking.

All that being said the carbotechs are suppose to have a much more progressive pedal feel which would allow more precise threshold braking.

[Dave Barker]

Hey Dave, thanks for the input, much appreciated.

I believe the DTC60 & 70 are the replacement for HT-10 & 14. Any specifics as to why the Carbotech win hands down? Durability, longevity, feel etc?

I have heard people complain about the bed in procedure for Carbotech but don't know if there's any truth to the matter.

Sorry, I must have missed this earlier

My experience was that the Carbotechs lasted sig longer and were much nicer to the rotors. They are also cheaper through Frank's group buy.

I found the XP-12 to be a bit twitchy but no more so than the HT-14s

[imclumzy]

Regarding the bedding process, Carbotech now offers a pre-bedded option (in response to customers baking their pads themselves in ovens or BBQs). I've used the pre-bedded XP10/8s on my Miata on a fresh set of rotors and pad wear has been even.

The other nuance is that Carbotech warns of mixing with other manufacturer compounds. Since my Miata is a DD I purchased a set of Carbotech Bobcats for the street so I don't have to swap rotors.

[Cap'n Pete]

It's been quite awhile since I've run Hawk's (HT14 for a season, and DTC70 for an event or two), and since it was on a different car than I have now, hard to give an apples-to-apples comparison to the XP12/10 combo I'm now using.

I have had no "problems" with either brand. They've all done a pretty good job of stopping my cars (4th-gen Camaros and C6 Corvettes).

I'll be honest and say that I haven't really seen the longevity out of the XP12's as I was hoping. But that's not to say that Hawk's would last any longer ... don't know ... haven't tried them on my current car.

In either case, I'm only focussing on the FRONTS, as the REARS seem to last forever (I've changed cars before I've ever worn out the rear pads, seriously!! :D).

Oh, and for BOTH sets of XP12's that I've run, I haven't stressed too much over the bedding process, and one set started with NEW rotors, the other set started on USED (street) rotors. Basically, same performance and life out of each set, so I don't think they're that fussy (or I'm just not critical enough??).

I wouldn't hesitate to run Hawk's again though.

There's my $.02, sitting on the fence ;).

[Jasonoff]

So to sum it up. Same s__t different pile... :D

[Cap'n Pete]

So to sum it up. Same s__t different pile... :D
Yup ;).

[Dave Barker]

So to sum it up. Same s__t different pile... :D

Not exactly. My experience is that Carbotechs are cheaper, especially through Frank's group buy.

[Jasonoff]

Not exactly. My experience is that Carbotechs are cheaper, especially through Frank's group buy.This is true. Not by much but it would add up over time.