PDA

View Full Version : Shop to modify crank?

JGraves
06-17-2004, 04:19 PM
Can anyone recommend a shop to lighten/knife edge a crank, preferably in the Montreal to Toronto area?

Thanks,
glh
06-17-2004, 08:56 PM
Jeff try Kirt at Ajax Engines his # is 905 686 0015 he can balance knife edge lighten on straighten cranks
Steve
ADAM
06-21-2004, 09:56 AM
beatty and woods in mississauga
adam
Dave
06-21-2004, 11:15 AM
Leitner Performance did mine a few years ago and did a very nice job.

I've heard Canadian Chrome and Crank (or something like that) are very good, but I've never used them.

Graeme at Canadian Cylinder Head Technologies may also be able to lighten cranks and his machine work is top notch if his head porting skill is any indication.

These are all GTA locations.
RedRabbit Racer
06-21-2004, 12:17 PM
I've had cams polished nicely at Canadian Chrome and Cranks for dirt cheap and was completed satisfied. easy going type of place. they have thousands of crankshafts of all shapes and sizes lined up. located just east of highway 400 north of Wilson Ave.
RacerRick
06-21-2004, 01:07 PM
Canadian Chrome and Crank is very good.

I wouldn't go near Beatty & Woods with a 10 foot pole ever since Jeff has been running the place.