PDA

View Full Version : Sources for parts...

Do It Sidewayz
11-03-2004, 11:03 PM
i need to replumb the brake lines and fuel lines in the rally car..


Where's the best place to get steel lines to do this??

I need 3/16" brake hard lines

and 8MM fuel lines
RacerRick
11-04-2004, 02:54 PM
I just completely redid my car, 3/16" brake lines and 1/2" fuel.

The brake lines and all fittings I got from Motive Automotive. It was about $30 for everything.

My fuel line is made by Russel and is aluminum -8 hardline line with all AN fittings to the pump. I still have to finish the lines from the pump to the carb. I need to pick up a pair of hose ends, and a -6 AN T fitting with pressure guage port to complete the setup I have correctly. I got everything from Karbelt.

Motive is on birchmount just south of eglington in Toronto.

Karbelt is in Pickering.
Do It Sidewayz
11-04-2004, 02:55 PM
where is Motive Automotive?
RacerRick
11-04-2004, 02:57 PM
That was without the flex lines....my flex lines were another $90.