Dyno Test day, April 22nd.

[Chuck91GT]

The following participants have pre-registered for this day, but if for some reason you wish to participate please feel free to add your name to the list. The day will start at 9 AM on a first come first pull basis. The cost will be $50 for two pulls or $65 for 3 pulls. The CCC has not officially gotten back to me as to whether or not 3 pulls are mandatory. As I mentioned on the previous dyno pull thread another club mentioned to me at the Open House last weekend that they could get 3 pulls for $125. Obviously this a better deal on a superior dyno.

Bubblecar
Chris91GT
Doug Vanderhaar
Gaspeddle
Jon
Rob martin
Solo Z
ThGear
Alber Ribeiro

The address is:

Steeda.ca
633 Main St. East
Mitlton, ON
L9T 3J2

Phone Number:

1-866-783-3327

[craig]

There's a chance I'll be down in Toronto that weekend. If so, I'll come out. It would be interesting to see how many horsepower have disappeared in 15 years ...

[Chuck91GT]

There's a chance I'll be down in Toronto that weekend. If so, I'll come out. It would be interesting to see how many horsepower have disappeared in 15 years ...

Hopefully you can make it because Bubblecar will be there with his new high powered Viper,

[vivid]

Bubblecar
Chris91GT
Doug Vanderhaar
Gaspeddle
Jon
Rob martin
Solo Z
ThGear
Alber Ribeiro
vivid :D

[thgear]

Chuck (or Chris) who will be there first at 9AM, the owners? (is that when the shop opens??) or yourself?

i have an exam that day so i wanna be the first one in and out :)

[Chuck91GT]

Chuck (or Chris) who will be there first at 9AM, the owners? (is that when the shop opens??) or yourself?

i have an exam that day so i wanna be the first one in and out :)

The shop will be ready to start at 9. Chris and I will be there before that time helping to set up. Be there say at 8:50 and I will see that you go first.

[Chris91GT]

The shop will be ready to start at 9. Chris and I will be there before that time helping to set up. Be there say at 8:50 and I will see that you go first.

Unless the 06 is already strapped to the dyno. :p

[RacerRick]

I want to see how much HP the Mullet makes with the tune backed down for reliability. They doing wideband o2?

Bubblecar
Chris91GT
Doug Vanderhaar
Gaspeddle
Jon
Rob martin
Solo Z
ThGear
Alber Ribeiro
vivid
RacerRick

[Chuck91GT]

I want to see how much HP the Mullet makes with the tune backed down for reliability. They doing wideband o2?

Bubblecar
Chris91GT
Doug Vanderhaar
Gaspeddle
Jon
Rob martin
Solo Z
ThGear
Alber Ribeiro
vivid
RacerRick

They will be doing wideband o2. I posted the costs for this additional procedure in a previous post under the Dyno Test Poll.

[RacerRick]

I won't be making it to the dyno in race trim...doh.

My exhaust is supposed to be done, but has been pushed to next week.

I guess I can see what it will do though.

[craig]

Confirmed, I'll be there. At least three pulls, with wideband O2, etc. Have bung, but may not have the same thread. No cat, anyhow (or it'll be out).

I have a chip of unknown origin that I want to check out. :D

Do folks have any idea when they will be there, like even morning and afternoon? As much as I'd like to, I can't spend the whole day there ... half a day is not a problem, tho. Sounds like if I show up at 8:30, the best I can do is third ... which if fine - but if you're all going to show up at 8:30-9:00, or I have to wait for all the pre-registered people to run, then I'll show up well after lunch ... any info appreciated, thanks.

Bubblecar
Chris91GT
Doug Vanderhaar
Gaspeddle
Jon
Rob martin
Solo Z
ThGear
Alber Ribeiro
vivid
RacerRick
Craig

[Cheers!]

Looks like 3 pulls is the magic number required. Also how many of you guys are turbo charged? Does Steeda offer logging of manifold pressure?

I uploaded the 2006 Dyno Plot submission form to this post (for all of those who didn't make it to the open house, am I the only one who didn't?)

Section 2 is most important.

[craig]

Great. :rolleyes: Now I have to work. May still make it in the afternoon ...

[Chuck91GT]

Looks like 3 pulls is the magic number required. Also how many of you guys are turbo charged? Does Steeda offer logging of manifold pressure?

I uploaded the 2006 Dyno Plot submission form to this post (for all of those who didn't make it to the open house, am I the only one who didn't?)

Section 2 is most important.

They can only log manifold pressures for late model Fords.

Remember to bring your CCC dyno plot forms with you tomorrow. Please have them filled out as much as possible in advance.

We have 11 people signed up. It will be on a first come, first pull basis starting at 9 AM sharp. Serge needs to go first because he has an exam right after, so he is the only one who is pre-scheduled. Please come as soon as possible since I don't want to be there all day (and all night) and there will probably be another club coming in the afternoon.

[Cheers!]

They can only log manifold pressures for late model Fords.

Remember to bring your CCC dyno plot forms with you tomorrow. Please have them filled out as much as possible in advance.

We have 11 people signed up. It will be on a first come, first pull basis starting at 9 AM sharp. Serge needs to go first because he has an exam right after, so he is the only one who is pre-scheduled. Please come as soon as possible since I don't want to be there all day (and all night) and there will probably be another club coming in the afternoon.

Chuck,

Don't you just take a knife and cut a vac hose on the intake manifold and add a nylon T to goto a pressure sensor on the dyno's computer? Then you just bring a spare peice of vac hose and replace the one you cut?

-J

[Chuck91GT]

Chuck,

Don't you just take a knife and cut a vac hose on the intake manifold and add a nylon T to goto a pressure sensor on the dyno's computer? Then you just bring a spare peice of vac hose and replace the one you cut?

-J

Not sure. Contact Pat at Steeda, 1-866-STEEDA-7 and he can answer your question. He is there now and probably will be until 8 PM tonight.

[James Mewett]

Looks like 3 pulls is the magic number required. Also how many of you guys are turbo charged? Does Steeda offer logging of manifold pressure?

I uploaded the 2006 Dyno Plot submission form to this post (for all of those who didn't make it to the open house, am I the only one who didn't?)

Section 2 is most important.

There is an error in the form. When calculating Calculated HP the formula should read:

Calculated HP = WHP / CF, not WHP x CF.

Sorry for the inconvenience!

I regret I can't be there to watch the action but I look forward to seeing the results.

As Jason has noted the form requires three pulls and the CCC has not altered this requirement.

[craig]

Came home to a sick dog :( , not going anywhere. Have fun!