What class are you running (SGT3 and above)

[Alloy GT]

Originally Posted by k.beaty

Could be that James is setting up the corner before the straight a little bit better, and carrying more speed onto the front straight...

Perhaps, but we are talking Krispy here and a high torque car... Besides, both corners before TMP and MIR straights are 2nd gear, hence cars rely mostly on torque vs momentum - hence I am scratching my bold head (sitting in an armchair of course LOL!). Anyhow, we will know soon enough

[Cap'n Pete]

Originally Posted by KLZEMX6

Burst my bubble? So I actually wasn't going that fast?

This bubble:

Originally Posted by KLZEMX6

I'm thinking 230 at mir should be very attainable!

[Cap'n Pete]

Serious question though, prior to your latest mods, what's been your best lap at MIR thus far? I actually can't remember my best lap in my '02?! I know I got a 1:35 out of my '93 Z28 (well setup car, driver-in-training) and dipped into a 1:31 with my Z06. Not sure how well I can do with the '02 Z28 at this point ... best to check Dr. Dave's times to see what an '02 Z28 is capable of .

[KLZEMX6]

Originally Posted by Cap'n Pete

This bubble:

I thrive on doubt

[KLZEMX6]

Originally Posted by Cap'n Pete

Serious question though, prior to your latest mods, what's been your best lap at MIR thus far? I actually can't remember my best lap in my '02?! I know I got a 1:35 out of my '93 Z28 (well setup car, driver-in-training) and dipped into a 1:31 with my Z06. Not sure how well I can do with the '02 Z28 at this point ... best to check Dr. Dave's times to see what an '02 Z28 is capable of .

Didn't run the car there last year didn't have enough gear to run it there

[Kart14]

Guess it's time to trade my 350z in for a Porsche GT3 RS.

http://www.porsche.com/canada/en/models/911/911-gt3rs/

At only a $154k plus HST it sounds like the perfect SGT2 car (450hp/3020lbs) or SGT1 on Hoosiers.

Perfect for humiliating 268whp Zs in SGT1 trim:

http://vimeo.com/40396057

[Cap'n Pete]

^ ^ How about that old dinosaur '93 Z28 I had that would have dyno'd about the same and was also classed in SGT1 on ubers? Heck, it didn't even have a fancy independent rear suspension like your car!

[msix]

Originally Posted by Kart14

Guess it's time to trade my 350z in for a Porsche GT3 RS.

http://www.porsche.com/canada/en/models/911/911-gt3rs/

At only a $154k plus HST it sounds like the perfect SGT2 car (450hp/3020lbs) or SGT1 on Hoosiers.

Perfect for humiliating 268whp Zs in SGT1 trim:

http://vimeo.com/40396057

Bring it on ... I like to humiliate fancy cars with my 85 325 BMW (with half the HP of the Porsche) in SGT2 ... hehe

Matt, I think you are trying to hint you are not happy where your car is classed, compare to other potential cars that could be in the same group ...
What should I say, just have fun ...
http://www.youtube.com/watch?v=MQ1LJ...2&feature=plcp

[Rob-RT]

If it makes you feel better I've seen an RS run a 1:16 or so :P

[racecartech]

Originally Posted by Rob-RT

If it makes you feel better I've seen an RS run a 1:16 or so :P

At what track????

[Rob-RT]

TMP 10 char

[KLZEMX6]

Originally Posted by Kart14

Guess it's time to trade my 350z in for a Porsche GT3 RS.

http://www.porsche.com/canada/en/models/911/911-gt3rs/

At only a $154k plus HST it sounds like the perfect SGT2 car (450hp/3020lbs) or SGT1 on Hoosiers.

Perfect for humiliating 268whp Zs in SGT1 trim:

http://vimeo.com/40396057

was the lap timer accurate at a 1.23.xx

[Jasonoff]

Humm maybe I would be on par in SGT2/3 then?

There's a 1:21.xx in there through traffic. I think I dipped into the 1:19.xx

http://youtu.be/rfWjltFtXyw?hd=1

[KLZEMX6]

Originally Posted by Jasonoff

Humm maybe I would be on par in SGT2/3 then?

There's a 1:21.xx in there through traffic. I think I dipped into the 1:19.xx

http://youtu.be/rfWjltFtXyw?hd=1

Car looks fast.

Mod list?

[nissannx]

Jason's coming out this summer! Aren't you, Jason! He's got a very nicely set up car.