CASC Ontario Region Message Forums  

Go Back   CASC Ontario Region Message Forums > CASC-OR Marketplace > For Sale - Racer to Racer

Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-2015, 09:49 PM
squeegen squeegen is offline
Registered User
 
Join Date: Jun 2014
Location: 705
Posts: 25
Built Honda Civic auto x/Track car

Car is currently 1st in the Mobil 1 CASC Auto Slolum Championship Series SM/SP class as of the time this ad was posted and was build to also compete Time attack at CSCS in the Super Street class but I dont have the time to compete in multiple race series.

Dyno Tuned at 217 whp and 146 wtq by Nick. We stopped tuning there because it maxed out the current injctors and can make more power with bigger injectors and retune (injectors now bought but not installed). Car is caged with the rear welded in and the front bars are bolted and removable. The car was alighned and corner balanced at Canalighnment

Drive Train:
built B18c type R engine swap,
Skunk2 pro series intake manifold,
Skunk2 intake mani thermal gasket,
Skunk2 pro series cam gears,
Skunk2 billet vtec soliniod,
Skunk2 billet spark plug cover,
AEM fpr and fuel rail,
cold air intake,
Mugen Jazma 4-1 type-r headers,
Chipped p28 computer, current tune at 217hp 148tq,
Walbro 255lph fuel pump,
BNIB RDX injectors,
Yonaka poly motor mounts
3” Skunk2 catback exhaust with test pipe,
Fluidline high flow rad,
B16a2 transmission (s4c i think is the model #) with
PIC Performance 4.9 final drive gear,
KAAZ race diff,
New GSR axels,

Suspension and brakes:
Skunk2 Pro-C 12-way coilovers 10k front 8k rear with an extra set of BNIB 8k sprngs as spares,
Skunk2 Front and rear camber kits,
Skunk2 Ultra series LCA’s (2015),
Energy Suspensions Red poly urethane bushings (every bushing on the car done)
Front sway bar delete but that a GSR bars with poly bushings,
Type-R rear sway bar,
ASR adjustable end links, (brand new)
ASR rear sub-frame brace,
Type R front strut bar,
Sandblasted and painted spindles with Buddy Club extended ball joints, new bearings, ARP 2.85 extended studs, Hawk HP plus front brake pads with GSR calipers, (2015)
Hawk HPS rear brake pads and GSR rear disk brake conversion with new bearings with ARP 2.85 extended studs, calipers and Energy Suspensions red rear trailing arm bushings,
Powerstop front and rear rotors
Russel Stainless steel brake hoses
GSR master cylinder and brake booster
40/40 prop valve,
Properly de-powered 2.98 integra steering rack (2015),
Moog inner and outer tie rods (2015),

exterior and interior:
Seibon “Evo” carbon fiber hood as well as a “stock style” carbon fiber hood,
Carbon fiber hatch,
Carbon fiber look rear race wing,
Carbon fiber vinyl roof (new 3M scotchbright),
Custom made front fenders (1 got cracked up but its fixed (drift spec with screws) still functions fine)
front lip,
rear bumper diffuser,
side skirts,
Cage (2015),
Sparco seat and Leaf 4 point harness plus 2 generic racing seats,
Momo steering wheel,
NRG slim quick release and Momo hub
K-tuned Competition short shifter (2015),
Skunk2 shift knob,
Autometer oil pressure gause with braided line,
5" tach with shift light,
(front)4 15x10 Keizer custom 3 piece race wheels 11 lbs each with 2 Hoosier A7 275/35zr15 (not many autox runs on them) plus 3 Hooser A6’s (the back piece on 1 wheel is damaged you can order just that piece from Keizer and should be much as the whole rim put together cost $450)
(rear or all)15x7.5" Rota Slipstream wheels with 2 225/45zr15 Hoosier A7 (only 3 autox events on them) plus 225/45r15 Hankook Z214 c71 tires,
15x7 BBS wheels with 225/50r15 Toyo R888's (well used)

Car is completely rebuilt only the doors, dash, and clutch master cylender are orginal, that's it. Please note this car is a RACE CAR not a show car dont try and low ball me cause the paints not perfect or there is some scratches. The car can be made street legel with a cat and reverse lights. It also comes with stock fenders it you dont want wheels that big.

Don't build a race car guys buy a proven 1 and save a boat load of money. If I don't get what I want I'm just going to keep the car and keep enjoying it, no need to see other than i'm getting married and having kids and won't be able to use it as much so its time to let someone enjoy it. No test drives or views unless your coming with money to buy I will tell you everythng about this car so there is nothing to question.

Email my kijiji ad for fast reply and to see pictures, kijiji ad: http://www.kijiji.ca/v-view-details....dId=1104376826

Last edited by squeegen; 10-01-2015 at 09:53 PM. Reason: changes
Reply With Quote
  #2  
Old 11-09-2015, 11:51 PM
squeegen squeegen is offline
Registered User
 
Join Date: Jun 2014
Location: 705
Posts: 25
Re: Built Honda Civic auto x/Track car

bump it up
Reply With Quote
Reply

Tags
auto cross, auto x, race, track, type r

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:55 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.