Radical on the Dyno

[CHAG AUTOSPORT]

we ran this Radical last week on the dyno
link
http://videos.streetfire.net/video/R...yno_634604.htm
enjoy

perry

[davedarrow]

was that a supercharged Radical or a 1500?

dave

[CHAG AUTOSPORT]

Originally Posted by davedarrow

was that a supercharged Radical or a 1500?

dave

yes its supercharged the motor is from a Hayabusa 1300 cc

[Matt Graham]

If the motor stays together (indications thus far are good) and we have a place to race, this car, and another just like it should be out at a few (maybe 4 or 5) regional rounds this year.

My lowly atmo 1300 won't cut the mustard, but I'll be out there bringing up the rear a few times as well.

-Matt

[davedarrow]

Ha!! i say--

Many times i've seen a lower HP car out drive a big HP car, driver skill is important too.

dave

[snowmanmtl1]

Ya, what he said.
Now where did I leave that turbo again?

[Matt Graham]

All 3 of us were within shouting distance of each other last season, so I don't think I'll be driving my way to beating these cars very often.

-Matt

[davedarrow]

twin turbos!!

[brucegre]

229 at the rear wheels - somebody's happy with the decision to supercharge! Better tell Mikey to look out.

[davedarrow]

wow!! my S2000 is 200HP at the flywheel-hope the 2 litres of torque helps me.

dave

[snowmanmtl1]

Originally Posted by brucegre

229 at the rear wheels - somebody's happy with the decision to supercharge! Better tell Mikey to look out.

I was only half joking about the turbo

[davedarrow]

i saw a show on pro-stock drag bikes,

all billet hyabusa motor makes 340HP naturally asperated-for 8 seconds then tear it down and rebuild it for the next pass

dave

[snowmanmtl1]

We would like to avoid those eight second motors.

[Matt Graham]

Originally Posted by snowmanmtl1

We would like to avoid those eight second motors.

Didn't you say something about a turbo and a 1000cc Gixxer?

[snowmanmtl1]

Well , that turbo kit won't fit in the Radical and there seems to be plenty of room in the Stohr. We have 3 motors for it so Andrew built the last one up for a turbo application ( thicker head gasket & Carrillo H beams) . No harm in giving it a whirl. 240rwhp @ 800lbs could be fun.