CASC Ontario Region Message Forums  

Go Back   CASC Ontario Region Message Forums > CASC-OR Marketplace > For Sale - Racer to Racer

Thread Tools Display Modes
Old 08-01-2013, 12:07 PM
kungfuSiR kungfuSiR is offline
Registered User
Join Date: Sep 2009
Location: Toronto Ontario
Posts: 76
Garrett GT Turbo, Type R Parts, SiR Parts, Brakes and Racing Parts

Cleaning out the garage of some of our spare parts. Just want this stuff gone so it's not taking up anymore space.

Garrett GT2871R Ball Bearing Turbo
CHRA was replaced at the beginning of last season 2012 with a brand new Garrett CHRA purchased from ATP turbo. The compressor housing has been polished. The turbine has had the internal wastegate welded shut which allows you to run an external gate. The turbine is a T25 5 bolt housing.

This turbo is perfectly sized/setup for road racing, and even drag racing if you're looking for 250-375whp. Very fast spool, and lots of top end power can be made with this setup.

Asking $500 obo

Brand New Hawk HP+ Rear Brake Pads HB350N.496
Brand new still in the plastic, these were purchased from Teknotik in May but never used. We switched to something more aggressive. My loss is your gain.

Asking $50

Used Hawk HP+ Rear Brake Pads HB350N.496
I have two sets of used HP+ Rear Pads. We only use these for 2-3 events and then switch them out, so there's still lots of life left on these pads.

Poorman's 4x100 Type R Big Brake Setup
Looking to sell our brake setup from last year. I'm going to put this together as a packaged turn key deal for however wants to buy it. It will include the following:

- OEM Remanufactured Type R Calipers (Bought June 2012 from Stern Acura in Aurora)
- Machined 23T calliper brackets to allow you to run this setup on 4x100 wheels on EG/DC2/EK.
- Brand new 11.1" Prelude Vtec rotors, re-drilled to 4x100 (Brand new)
- 1 set of almost new Performance Friction PFC01 Pads, they were only used at the CSCS Season Finale 2012, tons of life left.
- Almost brand new Goodrich stainless lines, purchased in August 2012 they maybe have 2-3 events on them.

This setup is a proven winning combination, we went 1.19s at TMP on this setup last year and never had any issues with the setup.

Asking $350

OEM Sir Side Skirts Milano Red
OEM from my SiR, not much more to say.
Asking $100 firm

OEM SiR Power heated mirrors Milano Red
OEM from my SiR, power heated, fully working. I replaced mine with APR mirrors
Asking $100

ABS Plastic Brake Ducts
These are the same ones that we have on our Time Attack car, should fit EK civics without any issues.

Asking $10 a duct

Everything is located in Markham Area, and everything will need to be picked up.

PM me for best results.
Reply With Quote

brakes, racing, turbo, type r

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 09:15 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.